Seachem MultiTest Iodine/Iodide - 75 Tests
MultiTest™ Iodine & Iodide
- Catalysis based, sensitive to less than 0.0025 mg/L
- Multi-cavity plate for simultaneous testing of up to 6 tests at the same time
- Includes reference for test validation
- Marine or Freshwater
Natural seawater (NSW) concentration of iodide is 0.06 mg/L. Ideally, it is advisable to maintain iodide close to NSW concentration. Concentrations above NSW may not be harmful, and, within limits, may even be beneﬁcial, but maintenance at elevated concentrations should be considered experimental.
The innovative MultiTest™ Iodine/Iodide kit offers a quantitative test for this important element of soft and hard coral growth. It measures iodine or iodide to less than 0.005 mg/L. The color scale peaks at 0.10 mg/L. It performs over 75 tests and contains a reference sample for validation.
MultiTest™ Iodine & Iodide performs over 75 tests
And with the multi-cavity test plate, multiple tests can be run at the same time.
Measures between 0–0.1 mg/L iodine or iodide
Detectable changes on the color chart in 0.0025–0.005 mg/L increments.
It isn't necessary to run a reference test to use this kit; however, its proper performance can be validated by running a test in the normal manner except that the reference sample is used in place of aquarium sample. You might choose to run a reference test if you have cause to believe the test is giving incorrect results.
- Iodide Reagent 1
- Iodide Reagent 2
- Iodide Reagent 2a
- Iodide Reagent 2b
- Iodide Reference
- Stir Rod
- Dispensing Pipette
- Sample Pipette
- Iodide Color Chart
- Multi-Cavity Test Plate