Nature's Miracle Cat Advanced Stain & Odor Remover Foam - 17.5 oz

Nature's Miracle

  • $ 13.55
    Unit price per 
  • Save $ 5.44

Shipping calculated at checkout.


Nature's Miracle Advanced Stain and Odor Eliminator works to discourage re-soiling by removing the odor of cat messes. The bacteria-based formula produces enzymes when it comes in contact with bio-based messes including severe urine, diarrhea, vomit and blood. The Stain and Odor Eliminator is safe to use on carpets, hard floors, furniture, fabrics and more, when used as directed, and leaves you with a light fresh scent.
  • Foam penetrates down into carpet to power out severe cat messes*
  • Discourages re-soiling by removing the odor of the toughest cat messes
  • Safe for pets & home*

*When used and stored as directed

    Nature's Miracle Cat BFA Item #
     Advanced Stain & Odor Remover Foam 17.5 oz NM96992

     

    People and pets should not be allowed on treated areas until product has dried.

    DIRECTIONS FOR USE 
    Before using, test surfaces to be treated for color fastness by applying to a hidden area. Wait 1 hour, then wipe with cloth. If color is removed from the test area, do not use Nature’s Miracle® Advanced Stain & Odor Eliminator Foam on those surfaces. Do not use on untreated hardwood, leather, suede, silk or wool specialty fabrics. Always use Nature’s Miracle Advanced Stain & Odor Eliminator Foam products first. Other cleaners and detergents may fail and chemically “set” stains that will be impossible to remove.

    FOR STAIN REMOVAL
    1. Wipe up as much of the stain as possible.
    2. Shake can well.
    3. Hold can upside down and point toward treatment area. Spray until foam is covering the mess. Foam will break down into carpet, penetrating the mess.
    4. Allow to work for 15 minutes, then blot up stain with a clean cloth.
    5. Allow area to dry for 24 hours.
    6. For severe, old or stubborn stains (feces or vomit/hairball), follow steps 1-4 above and follow with gently scrubbing the stain with a soft bristle brush for 1 minute, then allow to dry for 24 hours.
    FOR ODOR ELIMINATION
      1. Wipe up excess odor-causing material.
      2. Shake can well.
      3. Hold can upside down and point toward treatment area. Spray area with
      4. product until foam is covering the area. Saturation is important so that this product can penetrate deeply to the odor source.
      1. Do not wipe up access.
      2. Leave treated area wet and let it air dry. Odor will fade as this product
      3. dries. Complete odor elimination only happens when all odor sources are reached.